Kategórie

PullTester 26

PullTester 26
Motorized testing device for destructive and non-destructive pull force tests up to 1,000 N (220 lbf.).

Schleuniger’s PullTester 26 is a dual-range, motorised, bench-top unit designed to measure pulltest forces of wire crimp connections as well ultrasonic metal welding connections on a wider range than single-range pull test devices. These measured values are indispensible parameters (IEC 60352-2 standard) for quality control and assurance. This standard requiresmeasurement at the maximum measured force (destructive test). In addition to the base model PullTester 25, the PullTester 26 can also perform non-destructive tests (hold to a specified force). This versatile machine has two measuring ranges, which are individually calibrated enabling use of its 500 N scale for small wires, while easily switching to its 1000 N scale for larger wires. This dual-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate.

The IEC standard specifies that a pull tester measures with a consistent pull rate. The Schleuniger PullTester 26 is equipped with a controlled speed motor, ensuring consistent pull rates throughout the measuring range which means repeatable and accurate data. Pull forces can be measured in pounds, New tons or kilo ponds. The standard 12-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.

Applications

The PullTester 26 has additional features over the PullTester 25 to accommodate more stringent test requirements. It can also be integrated with a quality network which ties in crimp height, pull test and crimp force data to ensure a high quality tested product. Pull test data can be stored for future reference or downloaded for statistical evaluation. The PullTester 26 is specially suited for quality assurance in a production environment.

Special Features

  • Display above displays force, lower display for operation
  • Speed controlled motor for consistent pull rates throughout the measuring range
  • Dual range for improved accuracy over a wider range of wires
  • Variable pulling rates
  • 4 pulling modes for destructive and non-destructive tests
  • Memory for up to 2400 values
  • RS 232 interface for curve analysis and statistics with WinCrimp software
  • Netw orking capabilities

Technical Specifications

AttributeValue
Measuring Range

Standard: 0 – 500 N and 0 – 1000 N (0 – 110 lb. and 0 – 220 lb.), adjustable. Other variations possible

Units of Measure

N, Kp, lb.

Display

LCD 6-digit displays force value, LCD with 4 lines for operation

Applied Force Accuracy

0.3% of full scale

Operating Temperature

0 – 50° C

Maximum Stroke

43 mm (1.69”)

Cycle Time

Variable. 4 speeds: 25, 50, 100 mm and high

Pulling Modes

Pull + Break: Normal pull test until wire breaks

Pull + Hold: Pull to a specified force and hold for 1-120 sec (non-destructive test)

Pull + Return: Pull to a specified force and reduce (non-destructive test)

Pull + Hold + Break: Pull to a specified force and hold for 1-120 sec  (non-destructive test) and pull until wire breaks

Device Data Memory

Up to 48 jobs w ith 50 measurements

Monitoring

Device display output; Optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis

Setting Protection

IP 20

Print Capabilities

Yes, connect either to printer and/or via PC with WinCrimp Software through RS 232

Network

Several devices in combination with crimp force monitor and crimp-height measurement device via WinCrimp software.

Interface

RS 232

Motor

Motor 24 VDC

Power Supply

24 VDC

Weight

Approx. 8 kg (18 lb.)

Dimensions (L x W x H)

16 x 8 x 5” (405 x 205 x 130 mm)

CE-ConformityThe PullTester 26 fully complies w ith all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Nové produkty