StripCrimp LPC
Stripping and Crimping Machine for loose piece terminals The StripCrimp LPC is a benchtop machine for processing loose piece turned terminals in a cross section range from 0.14 – 2.5 mm2 (AWG 26 – 14). It strips a manually inserted wire, positions the terminal and crimps it to the wire all in one machine cycle. Modular change-over kits reduce machine downtime to a minimum and allow flexible processing of different terminal sizes and geometries (male / female).
Feeding and Positioning
A combined drum / track system feeds, sorts and separates the loose piece terminals. Depending on its geometry, the terminal is positioned in the crimp applicator by a special feeding module. The StripCrimp LPC can be equipped with three exchangeable feeding modules for different terminal feeding types.
Main Features
- Complete change-over to other terminal types in less than 5 minutes
- Simple operation with PILOT
- Crimp applicator PrismaCrimper, optional Daniels WA27 or WA22
- Crimp depth step-less adjustable (with PrismaCrimper)
- Programmable sequence: zero cut, strip, crimp
Technical Data
| Attribute | Value |
| Wire cross section | 0.14 – 2.5 mm2 (AWG 26 – 14) |
| Cycle time | < 2.5 s (for zero cut, stripping, terminal positioning, crimping) |
| Crimp type | 4 pin – 8-point crimp according to MIL spec 22520/1 |
| Terminal diameter (O.D.) | max. 6 mm (outer diameter) |
| Stripping length | 2 – 10 mm, in 0.01 mm increments |
| Break-out length | min. 25 mm (< 25 mm on request) |
| Start cycle | sensor trigger (optional foot pedal) |
| Power supply | 115 – 230 V, 50/60 Hz, max. 0.3 kW |
| Pneumatic connection | min. 6 bar, oil-free, dry and filtered compressed air |
| Dimensions (W x D x H) | 570 x 900 x 540 mm |
| Weight | 78 kg |
| CE-conformity | The StripCrimp LPC fully complies with all CE and EMV equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Important notice | Schleuniger recommends that wire samples be submitted in cases where there is
doubt as to the processing capabilities of a particular machine. |