UniCrimp LPC A
Crimping Station for loose piece terminals The UniCrimp LPC A is a modular crimping station for processing loose piece terminals (closed barrel) in a cross section range from 0.14 – 4 mm2 (AWG 26 – 12). Designed for integration in fully automatic systems, the UniCrimp LPC A automatically positions the terminals and crimps them onto pre-stripped wires with an 4-indent 8- point crimp. Modular change-over kits reduce machine downtime to a minimum and allow flexible processing of different terminal sizes and geometries (male / female).
Feeding and Positioning
A combined drum / track system feeds, sorts and separates the loose piece terminals. The integrated feeding module positions the terminal in the crimp applicator. Depending on the terminal feeding type, the UniCrimp LPC A is available in 3 versions.
Your Benefits
- Compact and open design
- Complete change-over to other terminals in less than 5 minutes
- Simple operation with PILOT
- Crimp applicator PrismaCrimper, optional Daniels WA27 or WA22
- Crimp depth step-less adjustable with PrismaCrimper
- Process monitoring for terminal presence and position during feeding
Technical Data
| Attribute | Value |
| Wire cross section | 0.14 – 4 mm2 (AWG 26 – 12) |
| Inner conductor diameter | max. 3 mm |
| Cable outer diameter (O.D.) | max. 7 mm |
| Cycle time | < 1.5 s (for terminal positioning, crimping) |
| Crimp type | 4 pin – 8-point crimp according to MIL spec 22520/1 |
| Terminal diameter (O.D.) | max. 6 mm (outer diameter) |
| Start cycle | I/O signal |
| Power supply | 115 – 230 V, 50/60 Hz, max. 0.3 kW |
| Pneumatic connection | min. 6 bar, oil-free, dry and filtered compressed air |
| Dimensions (W x D x H) | 180 x 400 x 450 mm |
| Weight | 45 kg |
| CE-conformity | The UniCrimp LPC A fully complies with all CE and EMV equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Important notice | Schleuniger recommends that wire samples be submitted in cases where there is
doubt as to the processing capabilities of a particular machine. |