STS 1100
Tinning station for lead-free tinning with integrated fluxing. Suited for all models of the CrimpCenter series.
Conductor end strands are treated with flux while passing through before tin coating. The tinning station STS 1100 uses lead-free tin and meets all requirements for evenly distributed tin coating.
All surfaces of the STS 1100 that are exposed to aggressive lead-free tin (such as tin bath and tin pump), feature a special coating to prevent corrosion and ensure a long product lifetime.
If twisting of conductor end strands is required prior to fluxing / tinning, the STW 1000 or STW 1100 twisting station is usually integrated on your CrimpCenter in combination with the STS 1100 tinning station.
Special Features
- Full integration and control via CrimpCenter operating software EASY
- For use with lead-free tin
- Consistently tinned diameters
- Wire cross sections up to 2.5 mm2 (AWG 12)
Scope of Delivery
- Tinning station including tin (approximately 5.5 kg tin)
- Flux pump
- Storage container, supply and drain for flux
Options
- Base frame, horizontally adjustable
- Base frame, not adjustable
- Drip protection (different versions available)
- Special nozzles to optimize tin jet
Technical Specifications
| Attribute | Value |
| Wire Cross Section | up to 2.5 mm2 (AWG 14); depending on wire also up to 4 mm2 |
| Max. Tinning Length | up to 5 mm; depending on wire also up to 10 mm |
| Operating Temperature | max. 400 ° C, adjustable |
| Power Output | max. 2000 W |
| Fluxing | integrated |
| Power Supply | 3 / N / PE AC 400 V; 50 – 60 Hz 3A |
| Dimensions (W x D x H) | 145 x 400 x 570 mm (15.7 x 5.7 x 22.4") (Station with optional base frame)
172 x 385 x 530 mm (15.1 x 6.8 x 21") (Flux-Tank) |
| Weight | approx. 25 kg (Inclusive not adjustable base frame and filled with tin) |
| CE – Conformity | The STS 1100 fully complies with all CE and EMC equipment guidelines relative to
mechanical and electrical safety and electromagnetic compatibility. |
| Important Note | Schleuniger recommends that wire samples be submitted in case where there is
doubt as to the processing capabilities of a particular machine. |