SLD 4100
Space-saving, fully pneumatic double gripper module for horizontal and vertical doubling (1 - 4 mm / 0.039 - 0.157").
The SLD 4100 double gripper module can be used with almost all models of the CrimpCenter family for processing horizontal and vertical doubling crimp applications. The module gathers two single wires in the proper orientation allowing the swivel arm gripper to collect them. The wires are then moved to a separate station for termination into a doubling crimp.
The SLD 4100 can process two wires with outer diameters from 1 to 4 mm (0.039” - 0.157”). Each wire can have a different length. Depending on the terminal design, wire orientation can be either vertical or horizontal. Wire orientation is fully programmable in the CrimpCenter EASY operating software and no tools are needed for changes.
Compared to the predecessor model, the SLD 4100 requires less space and is completely pneumatic; therefore, retrofitting is much easier.
Processing Capabilities
All of the applications listed below require an SLD 4100 double gripper module and additional processing stations. Possible configurations depend on the number of available stations of your CrimpCenter model.
| | |
Doubling Crimp
(same terminal) |  | CrimpCenter 63 / 64 / 67
CrimpCenter 36 |
Doubling Crimp
(different terminals) |  | CrimpCenter 64 / 67
CrimpCenter 36 |
Doubling Crimp
(with same Crimp / Seal) |  | CrimpCenter 64 / 67
CrimpCenter 36 |
Doubling Crimp
(with Twist / Tin and Crimp) |  | CrimpCenter 67
CrimpCenter 36 |
Doubling Crimp
(with Crimp / Seal and Crimp) |  | CrimpCenter 67
CrimpCenter 36 |
Special Features
- Horizontal or vertical doubling
- Wires to be doubled can have different lengths
- All parameters are fully programmable without mechanical adjustments
- Simple programming directly in CrimpCenter EASY operating software
Technical Specifications
| Attribute | Value |
| Wire Diameter | 1 – 4 mm (0.039” - 0.157”) |
Control | Programmable directly through CrimpCenter EASY operating software |
Power Supply | DC 24 V, 10 A |
Air Supply | Min. 6 bar, oil-free, dried and filtered compressed air |
Dimensions (W x H x L) | 122 x 380 x 405 mm (4.80 x 14.96 x 15.95”) (including connections) |
Weight | 6.5 kg (14.3 lbs) |
CE-Conformity | The SLD 4100 fully complies with all CE and EMC equipment guidelines relative to
mechanical and electrical safety and electromagnetic compatibility. |
Important Note | In some cases Schleuniger recommends that wire samples be submitted to ensure
the feasibility of particular applications. |