CableCoiler 500

CableCoiler 500
Light-weight, economical single pan wire coiler for coiling wire or cable weighing up to 4 kg (8.8 lbs.).


As the wire or cable exits the cutting and stripping machine, it passes through a guidetube and into the CableCoiler 500 coiling pan. The coiling pan speed is synchronizedwith the speed of the exiting wire or cable, making a uniform sized coil. The operatorcan change the diameter of the coil by adjusting the “Relative Speed” setting on theCableCoiler 500. Once the wire stops feeding and the coiling pan stops, the operatormanually unloads the wire or cable and initiates another cycle on the cutting andstripping machine.

Special Features

  • “Relative Speed” control for fully adjustable coiling speed
  • “Eject Time” control for adjusting coiling time after wire or cable is cut (only active with WS/Postfeed interface)
  • Supports new Schleuniger WS/Postfeed interface standard
  • Optical sensor for easy interfacing with machines which have no WS/Postfeed interface integrated or 3rd party cutting and stripping machines
  • Welded steel base with wide range of height adjustment
  • Locking casters for easy maneuverability
EcoStrip 9320 and CableCoiler 500EcoStrip 9320 and CableCoiler 500
Easy handling of the Cable coilsEasy handling of the Cable coils

Technical Specifications

Attribute Value
Max. Cable Diameter Up to 12 mm (0.47”)

Cable length minimum

1.800 mm (71”) depending on the coiling diameter

Coil inner diameter

Min. 150 mm (0.6”)

Coil outer diameter

Max. 300 mm (12.0”)

Coil weight

Max. 4 kg (8.8 lbs.)

Max. coiling speed

250 RPM

Max. wire speed

2.0m/sec (6.6 ft/sec)

Wire axis height

Adjustable from 864 – 1067 mm (34” to 42”)


WS/Postfeed interface (for use w ith Schleuniger machines w ith WS/Postfeed standard) Optical interface (for use w ith other Schleuniger machines or 3rd party machines) Footpedal to initiate machine cycle (active only w hen using the WS/Postfeed interface.

Power Supply

110, 115, 230 or 240 VAC

Power consumption

100 VA max.

Compressed air required


Dimensions (L x W x H)

610 x 560 x 1’000 mm (24.0 x 22.0 x 39.3”)

Weight (net)

20 kg (44 lbs.)

CE – Conformity

The CableCoiler 500 fully complies with all CE and EMC equipment guidelines relativeto mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in case where there isdoubt as to the processing capabilities of a particular machine.

New products