Categories

PullTester 20

PullTester 20
Economical motorized testing device for destructive pull force tests up to 500 N (110 lbf.) with selectable pulling speed.

Schleuniger’s PullTester 20 motorized, bench-top unit designed to measure pull-test forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range than single-range pull test devices. These measured values are indispensable parameters (IEC 60 352-2 standard) for quality control and assurance. The IEC standard specifies that the pull tester measures with a consistent rate. The Schleuniger PullTester 20 is equipped with a controlled speed motor, ensuring consistent pull rates throughout the measuring rangewhich means repeatable and accurate data. Pull forces can be measured in pounds, Newtons or kilo ponds. This standard requires measurement at the maximum measured force (destructive test).

Applications

The standard 12-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request. The machine will test pull forces up to 500 Newtons (110 lb.) and is specially suited for quality assurance in a production environment.

Features

  • simple LCD display for easy digital pull force read out
  • speed controlled motor for consistent pull rates throughout the measuring range
  • variable pulling rates
  • RS 232 interface for curve analysis and transfer to Microsoft EXCEL software

Technical Specifications

AttributeValue
ModelsPullTester 20 -50; PullTester 20- 25; PullTester 20 -TCP

Measuring Range

up to 500 N

Units of Measure

lb.

Display

LCD 4-digit

Applied Force Accuracy

0,4% of full scale

Operating Temperature

0 – 50°C

Maximum Stroke

48 mm (1.89“)

Pulling Speed

selectable 50 or 100 mm/min (1.97” or 3.9“ /min) for PullTester 20-50;
selectable 25 or 50 mm/min ((0.98" or 1.9’’/min) for PullTester 20-25

Pulling Mode

Pull + Break

Device Data Memory

Sending maximum pull force value to PC or serial printer

Monitoring

Device display output; Optional WinCrimp statistical software for visual force-timetable on PC and with download possibility to Microsoft® Excel software

Setting Protection

IP 20

Print Capabilities

Connecting to device or via PC

Interface

PullTester 20-25 and PullTester 20-50 over RS 232; PullTester 20-TCP over TCP/IP

Motor

Motor 24 VDC

Power Supply

24 VDC

Weight

approx. 5 kg (11 lb)

Dimensions (L x W x H)

340 x 185 x 140 mm (13.4 x 7.3 x 5.5“)

CE-Conformity

The PullTester 20 fully complies with aCE and EMC equipment guidelines relative to
mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in case where there is
doubt as to the processing capabilities of a particular machine.

New products