Categories

UniStrip 2300

Archive
UniStrip 2300
Programmable Stripping Machine The Schleuniger UniStrip 2300 strips wires ranging in size from 0.03 – 6 mm2 (32 – 10 AWG) and jacketed cables up to 5.5 mm (0.22“) in diameter. This innovative machine does not require any mechanical adjustments to process different wire sizes. Using the color touchscreen, the operator selects the desired wire size from the preprogrammed library and all parameters (cutting diameter, clamping pressure, blade way back, etc.) are automatically set.

The operator edits the stripping and pull-off lengths as required and the machine is ready for operation. The UniStrip 2300 begins the stripping process when the wire end touches the trigger sensor. The wire is automatically clamped and the stripping process is performed according to the programmed values. If desired, the program can be saved to internal memory for future use.

Special Features

  • Intuitive color touch screen user interface
  • Can strip inner conductors of jacketed cables with short break out lengths
  • No mechanical adjustments required when changing wire sizes
  • Very sensitive trigger sensor – works great for small, flexible wires
  • Operator has clear view of the entire working area

Programmable Processing Parameters

  • Cutting diameter, cutting speed
  • Blade way back (default values in “Basic Wire”, programmable in “Extended Wire”)
  • Stripping length, pull-off length, pull-off speed
  • Trimming function (for precise strip lengths)
  • Cable clamping pressure

Technical Specifications

Attribute Value
Wire Cross Section 0.03 – 6 mm2 (AWG 32 – AWG 10)

Max. Outer Diameter

5.5 mm (0.22“)

Diameter Increments

0.01 mm (0.001“)

Min. Stripping Length

1.5 mm (0.06”)

Max. Stripping Length

46 mm (1.81“) (stripping length plus pull-off length must be = 53.4 mm)

Max. pull-off Length

26 mm (1.02“) (stripping length plus pull-off length must be = 53.4 mm)

Length Increments

0.1 mm (0.01“)

Cycle Time

0.35 s (0.75 mm2 wire, stripping length 10 mm, pull-off length 5 mm)

Cycle start

Automatic trigger sensor or optional foot pedal

Available Stripping Blades

V-blades

Processable Insulation Materials

PVC, PUR, rubber, Teflon®, Tefzel®, Kapton, etc.

Cable Clamping

Programmable clamping force

Program Memory

1000 wires or cables (memory function only with “Extended Wire”)

Interfaces

Foot pedal, USB “Host”

Options

Foot pedal, special clamping jaws

Noise Level

< 70 db (A)

Power Supply

100/115 VAC, 230/240 VAC
65 W / 50/60 Hz

Dimension (L x W x H)

390 x 130 x 280 mm (15.3 x 5.1 x 11.0”)

Weight

9 kg (20 lbs)

CE – Conformity

The UniStrip 2300 fully complies with all CE and EMC equipment guidelines relative
to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in case where there is
doubt as to the processing capabilities of a particular machine.

New products